Skip to main content

Why Does Motor Oil Turn Black?


Why Does Motor Oil Turn Black?


Motor oil turns black during use for a couple reasons:

1) Heat cycles

During your drive to work in the morning, your engine reaches normal operating temperature (typically 195ºF-220ºF), heating the motor oil. Then the oil cools while your car sits in the parking lot. During lunch, the oil again is exposed to heat during your drive to Walmart for butter and shoe laces. The process repeats on the way home. And the next day. And the next.
That’s what’s meant by “heat cycles.” The continual exposure to periods of high heat naturally darkens motor oil.
Some additives in motor oil are more susceptible to darkening in the presence of heat than others. In addition, normal oxidation can darken oil, too. Oxidation occurs when oxygen molecules interact with oil molecules and cause chemical breakdown, just like how oxygen causes a cut apple to brown or iron to rust. High heat accelerates oxidation.

2) Soot

While heat cycles cause oil to darken, soot causes oil to turn black. Most people associate soot with diesel engines, but gasoline engines can produce soot as well, particularly modern gasoline-direct-injection engines.
Soot is a byproduct of incomplete combustion. Since soot particles are less than one micron in size, they typically don’t cause engine wear. For comparison, a human hair is roughly 70 microns in diameter.

If soot particles agglomerate into larger wear-causing contaminants, the oil filter will catch them. Sometimes people who use bypass filtration systems, which can filter contaminants down to two microns, express surprise that the motor oil is still black. Soot, however, can still elude filtration down to two microns. Any finer filtration and the filter could catch dissolved additives in the motor oil.

Oil Myth: The color of the oil indicates when it’s time for an oil change

It’s common to assume motor oil that has turned black has worn out or become too saturated with contaminants to protect your engine and requires changing. Not necessarily. As we saw, discoloration is a natural byproduct of heat and soot particles, which are too small to wear out your engine.
The only surefire way to determine if the oil has reached the end of its service life is to perform oil analysis. Chemically analyzing an oil sample reveals the condition of the oil, the presence of contaminants, fuel dilution and so on. Several companies offer oil analysis services, including Oil Analyzers INC.
Absent oil analysis, it’s best to follow the oil-change recommendation given in your vehicle owner’s manual or by the motor oil manufacturer. The recommended service intervals for AMSOIL products, for example, are based on thousands of data points spanning years of use.
It’s best to trust the data, not your eye, in this case. Otherwise, changing the oil could amount to throwing away good oil.

Time for an oil change? Find AMSOIL product for your vehicle here.

Comments

Popular posts from this blog

Palo Duro Jeep Jamboree

 April 30, 2024 written by Linda Ford We just returned from an epic trip to Amarillo, Texas to attend the Palo Duro Jeep Jamboree.  This event was our 8th Jamboree.  What is a Jeep Jamboree?  Good question!  It's an off-roading event specifically for Jeeps.  Other makes and models are not allowed to attend, you must have a Jeep.  Where are the Jeep Jamborees?  All over the world!  Jeep Jamboree just added events in Iceland, Swiss Alps and Portugal this year.  There are several events throughout the United States.  The eight that we have attended have been in seven different states.  Here is the list of the places we have been with the Jeep Jamboree: Drummond Island, Michigan (twice)    Ozark, Arkansas Lewisburg, West Virginia Seymour, Missouri Deadwood, South Dakota Mole Lake, Wisconsin Amarillo, Texas These events have all sorts of different trails, difficulties and great comradery amongst the fellow trail riders....

Prepping for Texas

 April 8, 2024 Written by Mike and Linda Ford  Our next big adventure is a trip to the Palo Duro Jeep Jamboree at Figure 3 Ranch near Amarillo, Texas.   This will be the 9th Jamboree that we have attended and our first time in Texas. Saharacon, our 7-year-old Jeep Wrangler JKU, needed some maintenance this year before she's ready for the trails.  She had a bent rear control arm, all four doors were seized on, the control arm bushings were worn, and she had a leaking front axle.   We also installed a new Stinger infotainment system with cameras on the front and back of the Jeep.  We can't wait to see how it performs on the trail. Working on the doors - AMSOIL MP Metal Protector came through and all the doors were able to be removed, lubed up and put back into place for the season.  We usually leave the doors on all the time, but it doesn't hurt to make sure all the areas are free moving. Next up to get ready is the Ram 3500 Dually and the Lanc...

Ways to Prep Your Snowmobile for Winter

  Skip to content Toggle navigat  Ways to Prep Your Snowmobile for Winter Jamie Gibson | Oct 08, 2019 8:18 AM Snowmobile maintenance is a huge part of getting your sled ready for winter . Nothing ruins a ride more than a breakdown, so we put together some tips to help you get your snowmobile ready for winter. Check the spark plugs Inspect spark-plug and wire condition. Ski-Doo E-TEC engines require indexing if removed or replaced, so be sure to check your owner’s manual for proper instructions. Replace plugs that appear excessively dirty or worn along with any worn or frayed wires. Inspect clutches and suspension Check clutches, the drive belt and suspension for wear and tear. Greasing and inspecting the suspension components and slides (hyfax) are a great idea. Slides typically have a small line across them indicating when they are worn out. If they are below the line at all, replace them. Items to check in the suspension include loose or worn parts and missing or loose idler...